:	May 12, 2004

.

Disconnect the battery ground cable.

.

Remove the accessory drive belt.

.

: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open connections to prevent contamination. :   Some oil spillage is inevitable during this operation. Clamp the power steering pump supply hose to minimise fluid loss.

.

Disconnect the high pressure line at the steering pump union.   Position an absorbent cloth to collect fluid spillage.

.

Disconnect the power steering pump supply hose.   Release the clip.

.

Remove the power steering pump.   Remove the 3 bolts.

.

Install the power steering pump.   Clean the component mating faces.   Install and tighten the bolts to 25 Nm (18 lb.ft).

.

Connect the power steering supply hose to the steering pump.   Clean the component mating faces.   Secure with the clip.

.

Connect the high pressure line to the steering pump.   Clean the component mating faces.   Install new seals.   Tighten the union to 25 Nm (18 lb.ft).

.

Install the accessory drive belt.

.

Connect the battery ground cable.

.

Fill and bleed the power steering system.